Nissan Cube Life - Nissan Cube Car Forums banner
1 - 8 of 8 Posts

· Registered
Joined
·
683 Posts
meisrandy said:
has anyone put on 9in wide wheels in the rear yet?!
i want to put on 9in wide wheels what do you guys think?

17x9in +20 do you guys think i will rub on the inside?
im running a 8 inch wheel..with a +10 offset in the rear..and it dosent rub..i think you will be ok..but it will stick out wayyy to much from the wheel well..
 

· Registered
Joined
·
96 Posts
The XXR wheels should be 8 inches wide with a +15 offset. I used an offset calculator and it says a 9 inch +20 should stick out .30 inches more than hotcube's. It could work but you would either need flares or some mad camber and it would have to be slammed just to look right.
 

· Registered
Joined
·
683 Posts
nosser said:
The XXR wheels should be 8 inches wide with a +15 offset. I used an offset calculator and it says a 9 inch +20 should stick out .30 inches more that hotbox's. It could work but you would either need flares or some mad camber and it would have to be slammed just to look right.
^^ good stuff..and I agree.. im pushing it with my poke but when i go low it will look perfect..
 

· Registered
Joined
·
3 Posts

I wanted to know what's the biggest size of rim you can put on it without messing anything up on the frame or voiding the warranty. I saw one cube with 20'' rims but didn't know if I was seeing things :eek:
If I have a chance I will slam some on 8)
 

· Registered
Joined
·
3 Posts
;D :yes: Hey thx I knew my eyes were not going bad. I like that reply about putting stock back on it's gangsta, me likey :mad:. So my question know is how wide of a tire would be good so it won't stick out making it like a froggy. :roll:
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top