Nissan Cube Life - Nissan Cube Car Forums banner

Tanabe R&D for cube is finished

1769 Views 1 Reply 2 Participants Last post by  ChristineK
http://www.tanabe-usa.com/rnd2009-results.asp

'09 Nissan Cube DF210 Springs Not Pass Not enough suspension stroke
'09 Nissan Cube NF210 Springs Pass July 2009
'09 Nissan Cube Sustec Pro S-0C Coilover Pass July 2009
'09 Nissan Cube Medalion Touring Exhaust Not Pass Exhaust routing needs redesign
'09 Nissan Cube Concept G Exhaust Not Pass Exhaust routing needs redesign
'09 Nissan Cube Tower Bar Pass TBA

Looks they will be making DF Springs for the Cube/Versa as well finally.
1 - 2 of 2 Posts
No mistaking, a lowered car looks good. But bad spring design can effect a lot, to include cabin noise. My left rear coil on my lowered springs for my FIT pops as the coil rubs together when the coils meet. They added a clear rubber tubing on the outside of the coil to eliminate this to no avail on that coil. Those are Eibach springs and get better ratings than say Megan Racing and others.
The other 3 are perfect but that one sucks. I have moved the tubing up and down the coil to see if I could remedy it too.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top