Nissan Cube Life - Nissan Cube Car Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
674 Posts
Hi does anyone know the best way to wire up a rear fog lamp for uk spec?
If you live in the UK, any service shop would be able to tell you. Since we don't have them in America, I have no idea how they turn on. I would imagine that they would have a separate switch. The simplest way to do it would be to have it controlled by a switch near the dash, definitely with a fuse in the line.
 

·
Registered
Joined
·
15 Posts
It will be best if you take it to the service shop nearby especially if you're not knowledgeable about installing fog lights. You can consult tutorials on the internet as well if you really want to do it.
 

·
Registered
Joined
·
9 Posts
If you mean a basic fog light to pass the mot I'm in the process of figuring best way myself. I reckon take out the driverside reverse light, put in an equivalent red bulb, cut the live wire to connector and wire it to a switch at the front. It will not be connected to the side lights but will work independently which is OK for mot I think. Make sure 3 way switch with led.
 

·
Registered
Joined
·
2 Posts
It will be best if you take it to the service shop nearby especially if you're not knowledgeable about installing fog lights. You can consult tutorials on the internet as well if you really want to do it.
I also went to the service. I bought some LED headlights from vont.com, and I thought of installing them by myself, but I was afraid of doing something wrong, so I decided to go to a car repair shop. I know that it is more expensive, but at least I was sure that the job would be done qualitatively by a professional. Most of all, I was afraid that I would destroy the electric system in the car by incorrectly installing the headlights, which are very expensive to replace. In my opinion, I have made the right decision because now everything works without any issues.
 
1 - 6 of 6 Posts
Top