Nissan Cube Life - Nissan Cube Car Forums banner
1 - 1 of 1 Posts

1 Posts
Discussion Starter · #1 ·
Looking to put something stiffer than OEM rears on my standard suspension-equipped 2009 Cube. Since there's no more Tokico, it looks like only OEM style shocks are available.

I started comparing shock specs and found that the Toyota FJ Cruiser and certain years of 4Runner have a very similar spec and mount style. Probable physical differences are the upper threaded ends and the diameter of the lower mount bolts, neither of which would be insurmountable.

I understand that the valving is going to be different for a heavier rear-drive vehicle, but since I'm looking for stiffer it might be worth a shot? If they fit it opens up a huge number of rear shock options. For example, Bilstein Part Number:24-187558.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.