Nissan Cube Life - Nissan Cube Car Forums banner

electronic steering lock

27K views 16 replies 11 participants last post by  Columbia1991 
I Did like the video shows except my board needs to see the motor. Seems to be working fine other than the KEY light on. Put all back in metal box and mounted back to column. I was not able to put one of the board screws back in due to the tape around the micro switches covering the screw hole, and I did need to trim off a tab on the box cover due to the tape holding the switch buttons down being in the way as well. Also not a bad idea to get 2 new micro switches and relays. also check the 2 capacitors...I had to change them both. About $40 or so all in and some soldering skills....electronic components fail.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top