Nissan Cube Life - Nissan Cube Car Forums banner

CVT Transmission pan torque specs

1381 Views 4 Replies 4 Participants Last post by  hondo1
I'm changing my CVT oil filter(s) and gasket. Does anyone have the pan torque spec? Also yes I did a search but couldn't find an answer.
1 - 5 of 5 Posts
Sorry to necro an old thread but this might have saved me snapping a bolt off when I did the same. 52 edit per below Ft-Lbs in-lbs per the service manual.
Grey Wood Font Electric blue Midnight
See less See more
Sorry to necro an old thread but this might have saved me snapping a bolt off when I did the same. 52 Ft-Lbs per the service manual. View attachment 6469
Thanks but I thought a Black wrench in a white square has the units N-m (kg-m, in-lb). So it should be 52 in-lbs, which isn't very tight.
I believe those service manuals have Ft-Lbs as I've never heard of tightening a drain plug to only 25 In-Lbs?

edit my mistake black wrench in white square you are correct!
I believe those service manuals have Ft-Lbs as I've never heard of tightening a drain plug to only 25 In-Lbs?

edit my mistake black wrench in white square you are correct!
Don't use Ft-lbs I almost did In-lbs is correct 25 Ft-lbs might strip out!
1 - 5 of 5 Posts
Top