Nissan Cube Life - Nissan Cube Car Forums banner

Cube's Wheel Bolt Pattern?

44625 Views 34 Replies 15 Participants Last post by  elDizzle_foShizzle
Anyone knows the Cube's Wheel Bolt Pattern?
1 - 20 of 35 Posts
4 Bolt Wheel

Japanese JDM Tire Spec: 175/65/15 or 195/55/16

US Tire Spec: not 100% sure, correct me. Edmunds.com says "195/60R15" for the 2010 model.
Not sure that answers the question (you gave tire size) - bolt pattern is a metric unit that specifies lug nut spacing on a given wheel. Honda's tend to have a 4x100 bolt pattern and I am not sure what the Cube will have - possibly same as Versa?
If Nissan is going to follow Versa's Bolt Pattern, it's going to be 4x100 and 4x114 .
My BAD!!! ;D ;D forgot the coffee this morning...
It looks like it could very well be 4x100 in person, but at the same time, 4x114 is very close. I'm gonna keep my fingers crossed it's 4x100 for the sake of aftermarket wheel choices.
We'll have to wait for more info from Nissan on that. Have to know not only bolt pattern (4x100 or 4x114) but also offset to ensure aftermarket wheels fit properly.
Tomas said:
We'll have to wait for more info from Nissan on that. Have to know not only bolt pattern (4x100 or 4x114) but also offset to ensure aftermarket wheels fit properly.
Naaa...+0mm offset will work fine ;)
anyone know if the USDM cube will have a spare tire? if its the inflating can, that may be a deal breaker for me
EzeE1o said:
anyone know if the USDM cube will have a spare tire? if its the inflating can, that may be a deal breaker for me
None of the pics have shown a spare, or space for a spare, in the USDM Cube, and the JDM Cube does not have one.

I'm not sure, but I believe it MAY be a federal requirement for new cars to have them here.... (I'll look for this.)

When Toyota brought their JDM bB to the US one of the main modifications they made to the unibody and interior (aside from the LHD change) was to provide a space for a spare tire in the Scion xB. Hopefully Nissan would do the same in some way for their USDM Cube.
Well, I looked in the FMVSS and it appears that providing passenger vehicles with no spare tire is acceptable under federal regs. :(

We'll just have to wait and see what Nissan decides to do for the US model.



REF: http://www.expediter.com/natm pdf folder/B folder/B7 5-FMVSS 571.110 2005.pdf
Tomas said:
EzeE1o said:
anyone know if the USDM cube will have a spare tire? if its the inflating can, that may be a deal breaker for me
None of the pics have shown a spare, or space for a spare, in the USDM Cube, and the JDM Cube does not have one.

I'm not sure, but I believe it MAY be a federal requirement for new cars to have them here.... (I'll look for this.)

When Toyota brought their JDM bB to the US one of the main modifications they made to the unibody and interior (aside from the LHD change) was to provide a space for a spare tire in the Scion xB. Hopefully Nissan would do the same in some way for their USDM Cube.

i found a pic that shows something that looks like a spare next to the muffler...if it is a spare, then it may be bad news flor the e4wd
See less See more
If that's the space for a spare, it will definitely be a "compact spare" and it will probably require a lift-up panel on the floor of the cargo area to get to it. In one drawing of the interior there seems to be a thumb-notch at the rear edge of the cargo floor, which would go along with that...

http://www.nissanusa.com/cube/index.html?intcmp=Cube_Microsite.Promo.Homepage.Home.P1#/en/seating/

(It also looks like one heck of a lift-over height with the way they have the rear door set so high above the tails.)
It looks like it would be where the gas tank will go.
Not sure, but think tank is ahead of axle, under rear seat...
Tomas said:
EzeE1o said:
anyone know if the USDM cube will have a spare tire? if its the inflating can, that may be a deal breaker for me
None of the pics have shown a spare, or space for a spare, in the USDM Cube, and the JDM Cube does not have one.

I'm not sure, but I believe it MAY be a federal requirement for new cars to have them here.... (I'll look for this.)

When Toyota brought their JDM bB to the US one of the main modifications they made to the unibody and interior (aside from the LHD change) was to provide a space for a spare tire in the Scion xB. Hopefully Nissan would do the same in some way for their USDM Cube.
After exploring on the Japanese Cube website, I found the full owner's manual. I can't read Japanese, but there are diagrams on the location of a mini spare on page 216.
got a link?
1 - 20 of 35 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top